TRAK KX2 Bed Mill w/KMX Control KX2
Featured
TRAK KX2 Bed Mill w/KMX Control KX2
$41,729.68 (USD)
Location:Albert Lea, MN
or
Call 712-737-8700
Description
Equipped with:
Auto lube pump
Precision ground ballscrews installed in the table, saddle and column
Chrome hardened and ground quill
Meehanite casting
Turcite coated slide ways
Wide way surfaces are hardened and ground
Work lamp
Power drawbar
Specifications
| Manufacturer | TRAK KX2 Bed Mill w/KMX Control |
| Model | KX2 |
| Condition | New |
| Stock Number | 11207 |
| Table size | 49" x 9" |
| T-slots (number x width x pitch) | 3 x .63" x 2.5" |
| Table travels (X,Y,Z axis) | 31" x 16" x 23.25" |
| Quill diameter | 3-3/8" |
| Maximum quill travel | 5" |
| Spindle taper | R8 |
| Spindle speed range | 60-4200 RPM |
| Spindle center to column face | 18.5" |
| Spindle motor | 3 HP |
| Power requirements, control | 110V, 1 PH, 10A |
| Power requirements | 220/440V, 3 PH, 8.5/4.3A |
| Maximum weight of workpiece | 1,320 LBS |
| Table height | 36.75" |
| Maximum spindle nose to table distance | 26.75" |
| Rapid travers X & Y | 100 IPM |
| Trapid travers Z | 150 IPM |
| Drilling maximum capacity | 1" |
| Milling maximum capacity | 3"3/min |
| Tapping maximum capacity | 3/4"-10" |
| Minimum height | 92.5" |
| Maximum height | 97" |
| Width of machine including tablr | 71.63" |
| Overall width includig full table traverse | 104" |
| Overall length w/electric door open | 78" |
| Machine weight | 3,500 LBS |