TRAK TMC14 Toolroom Machining Center w/ProtoTRAK RMX Control TMC14
Featured
TRAK TMC14 Toolroom Machining Center w/ProtoTRAK RMX Control TMC14
$130,147.11 (USD)
Location:Orange City, IA
or
Call 712-737-8700
Description
Equipped with:
Parasolid and DXF converter
Probe kit part measurement
Electronic handwheel
TRAKing software
Specifications
| Manufacturer | TRAK TMC14 Toolroom Machining Center w/ProtoTRAK RMX Control |
| Model | TMC14 |
| Condition | New |
| Stock Number | 11213 |
| Table size | 23.62" x 62.99" |
| T-slots (number x width x pitch) | 5 x .709" x 4.921" |
| Travel (X,Y,Z axis) w/soft limits | 60" x 27" x 25" |
| Spindle taper | 40 Taper |
| Spindle speed range | 50-8,000 RPM |
| Spindle nose diameter | 3-3/4" |
| Tool clamping force (90 psi) | 2,200 LBS |
| Tool holder type | CAT40 or BT40 |
| ATC tool capacity | 16 |
| Maximum tool weight | 15 LBS |
| Maximum tool diameter | 3.14" |
| Carousel speed | 0.8 sec/station to station |
| Tool selection system | Bi-directional/shortest path |
| Spindle motor-peak | 22.5 HP |
| Spindle motor-continuous | 15 HP |
| Power requirements | 208-480V |
| Maximum weight of workpiece | 2,640 LBS |
| Height of table | 38.37" |
| Minimum spindle nose to table distance | 2.25" |
| Maximum spindle nose to table distance | 28.75" |
| Distance of tool carousel to table | 21.5" |
| Rapid traverse X,Y,Z | 1,000 IPM |
| Coolant tank capacity | 70.5 gallons |
| Machine dimensions | 120.5" x 224.13" x 156.22" |
| Machine weight | 16,500 LBS |