TRAK TMC12 Toolroom Machining Center w/ProtoTRAK RMX Control

TRAK TMC12 Toolroom Machining Center w/ProtoTRAK RMX Control

$137,524.37 (USD)

Location:Albert Lea, MN

or
Call 712-737-8700

Description

Equipped with:

4th axis option

Electronic handwheel

Probe kit part measurement

Retention knobs-BT40 tooling

Clear off software (3 axis only)

Converter-parasolid and DXF files

TRAKing software

Specifications

ManufacturerTRAK TMC12 Toolroom Machining Center w/ProtoTRAK RMX Control
ModelTMC12
ConditionNew
Stock Number10991
Table size23.62" x 51.18"
T-slots5 x 0.709" x 4.921"
Travel (X,Y,Z axis) w/soft limits50" x 27" x 25"
Spindle taper40 taper
Spindle speed range50-8,000 RPM
Spindle nose diameter3-3/4"
Tool clamping force (90 psi)2,200 LBS
Tool holder typeCAT40
ATC tool capacity16
Maximum tool weight (including holder)15 LBS
Maximum tool diameter3.14"
Carousel speed0.8 sec from station to station
Tool selection systemBi-directional/shortest path
Spindle motor (peak)22.5 HP
Spindle motor (continuous)15 HP
Power requirements240V
Maximum weight of workpiece2,200 LBS
Height of table from bottom of bed38.37"
Minimum spindle nose to table distance2.25"
Maximum spindle nose to table distance28.75"
Distance of tool carousel to table21.5"
Spindle center to spindle head casting face27.56"
Minimum machine height105"
Maximum machine height (head all way up)120.5"
Machine dimensions133.86"W x 144.76"L
Machine weight14,300 LBS
Rapid travers X, Y, Z1,000 IPM
Coolant tank capacity70.5 gallons
Coolant pump750 watts
Coolant wash pump1290 watts
Air pressure3.0 CFM @ 90 PSI or 25 SCFM
Lubrication pump capacity2 liters