TRAK VMC10si Vertical Machining Center w/Sinumerik One Control
Featured
TRAK VMC10si Vertical Machining Center w/Sinumerik One Control
$116,679.65 (USD)
Location:Albert Lea, MN
or
Call 712-737-8700
Description
Equipped with:
Sinumerik One CNC
24 station tool magazine, dual arm tool changer
Advanced 12,000 RPM spindle w/hybrid ceramic bearings
Linear roller bearing slides (on all axes)
Coolant through spindle
Probe kit (tool touch off & part measurement)
Transformer
One Dynamics – surfacing
Handwheel run
Specifications
| Manufacturer | TRAK |
| Model | VMC10si |
| Condition | New |
| Serial Number | 241EZ496 |
| Stock Number | 11256 |
| Table size | 44.09" x 19.69" |
| X axis travel | 40" |
| Y axis travel | 20" |
| Z axis travel | 20" |
| Rapid traverse X,Y,Z | 1,000 IPM |
| Maximum cutting speed | 1,000 IPM |
| T-slots (number x width x pitch) | 5 x .709" x 3.937" |
| Maximum weight of workpiece | 2,024 LBS |
| Table height | 38" |
| Minimum spindle nose to table distance | 3.5" |
| Maximum spindle nose to table distance | 23.5" |
| Distance of ATC arm to table | 22.09" |
| Spindle taper | #40 |
| Spindle speed range | 10-12,000 RPM |
| Spindle nose diameter | 3" |
| Tool clamping force (90 psi) | 1,500 LBS |
| Tool holder type | CAT40 standard |
| ATC tool capacity | 24 standard |
| Spindle motor (peak) | 41.5 HP |
| Spindle motor (continuous) | 20.1 HP |
| Spindle cooler oil capacity | 1 gallon |
| Power requirements | 480V |
| Coolant tank capacity | 60 gallons |
| Machine dimensions | 144" x 112" x 108"H |
| Machine weight | 10,250 LBS |